Material
OHA-Press is an asbestos-free sealing material. It contains aramid fibers and other high-temperature asbestos substitutes, which are processed under high pressure and elevated temperature with high-quality elastomers.
Characteristics
OHA-Press OHA-Press shows an excellent sealing behavior with gases and liquids, while at the same time good adaptability. This low-cost sealing material has a good compressive strength. Furthermore, OHA-Press is resistant to many solvents, oils, fuels, water and many other media.
Areas of applications
Sanitary and heating sector, machinery, plant and pipeline construction. Well suited for low to medium thermal-mechanical strain. Because of its physiological harmlessness, OHA-Press can also be used in drinking water and foodstuffs.
Surface
OHA-Press seals are standard on both surfaces with an anti-stick coating, which makes it much easier to remove or install new seals.
The above mentioned chemical and temperature resistance data are those of the manufacturer. The values refer exclusively to laboratory tests with raw materials. In case of doubt, we strongly recommend to carry out a test. A legal claim cannot be derived from this information, we exclude any warranty and liability. The chemical and mechanical resistance alone is not sufficient for assessing the serviceability of a product. In particular, the regulations for flammable liquids (explosion protection), for example, must be observed
Technical data sheet on enquiry.
Attention !! The drawings and illustrations are for illustration purposes only and are not to scale. Due to the representation on screen, the colors shown may differ from the actual colors of the products. This deviation has no effect on the functionality.
